The difference between coiled safety cables like # RM-643, and straight cables like # RM-645, other than the design, is the applications for which you would use each. For example, some tow bars, like # RM-422, have built in safety cable channels which would ideally work with straight cables. The channels hold the coils up so that they do not get caught on anything or drag on the ground. So for a tow bar with built-in channels, I recommend straight cables.
Coiled safety cables are best... view full answer...
The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, will fit a 2010 Jeep Wrangler without aftermarket bumpers, winch, or guards. There is some trimming needed on the factory rock guard underneath the front bumper.
The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, is for the 2007 to 2009 Jeep Wrangler and Wrangler Unlimited. It will not fit the 2010 Jeep Wrangler.
The Roadmaster EZ4 series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they have... view full answer...
As long as the strap or wire cable you are using is rated properly for your winch, either one will work well with the Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL14527 that you referenced. Using a strap or cable will come down more to personal preference.
The wire cable will allow you to have a longer lead and will not offer any amount of give. Using a strap can limit the length of the lead. If you will be winching items that need to have the lead wrapped around them, the strap... view full answer...
The safety cables by Roadmaster part # RM-655-76 and the 910650-76 are the same cables. The difference is the # RM-655-76 is for a pair and the other is a single. view full answer...
The Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 and the Curt Multi-Ball Adjustable Ball Mount part # D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then allows for more rise/drop adjustments. The more rise/drop adjustments you have, the greater number of trailers you can tow level. In regards to the manufacturer, both Curt and Buyers Products are reputable brands so I would not let this alone... view full answer...
The Roadmaster Blackhawk 2 # RM-422 comes with just the tow bar, although one feature it does have is cable guides to protect your safety cables and wiring. The Blackhawk 2 has a shipping weight of 64 lbs, so its weight will pretty close to that.
The comparison between the Blackhack 2 and the Roadmaster Nighthawk All Terrain # RM-677 is the Blackhawk 2 has a weight capacity of 10,000 lbs, the Nighthawk 8,000 lbs: the Blackhawk 2 is made of steel and the Nighthawk is made of aluminum. The... view full answer...
The Curt Spyder gooseneck hitch that fits in 5th wheel rails # 16085 is just a different design than the plates such as # 16055. The Spyder cannot be mounted with an offset (with the ball closer to the tailgate) but since you have a long bed truck you would not need the offset for turning clearance.
The Curt Gooseneck plate, # 16055, has the ball welded closer to one end than the other so it can be mounted with an offset.
Both types of hitches have places to attach safety cables. However... view full answer...
To flat tow your 2020 Jeep Cherokee Trailhawk Elite you will need at least 5 main parts. Those parts being a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system.
Overall both had similar recommendations other than the braking system and that really just comes down to personal preference. One offered the Roadmaster InvisiBrake Supplemental Braking System # RM-8700 (requires the # RM-751471 for installation) which is a permanent installation that doesn't... view full answer...
For your 2010 Smart For Two, we have the Roadmaster EZ Base Plate Kit, part # 52285-1, and the Blue Ox Base Plate Kit, part # BX1987. Both the Roadmaster and Blue Ox base plate kits feature removable drawbars, so that the base plate kit is less visible when you are not towing the vehicle. Both the Roadmaster and Blue Ox base plate kit would be a good option for your 2010 Smart Car.
In addition to a base plate kit, you will need a tow bar, safety cables, wiring or lighting, and a supplemental... view full answer...
I have a solution for you, but no the etrailer Invisible Base Plate Kit item # e98950 is not confirmed to fit your 2021 Jeep Grand Cherokee. However, the Demco Tabless Base Plate Kit item # DM9519291 is confirmed to fit your vehicle. This is a comparable base plate kit with identical dimensions and capacity. I have linked an installation video.
If you don't have the rest of the components to flat tow your vehicle, this is what you will need:
Tow Bar Demco Excali-Bar III Non-Binding Tow... view full answer...
Since both the EZ4 # RM-521448-4 and EZ5 # RM-521448-5 base plate kits fit your 2014 Jeep Wrangler Unlimited and have removable draw bars there really doesn't seem to be much of a difference at first glance. However, there are some significant differences that are important to take note of.
The EZ5 kit is easier to connect your Falcon tow bar to but does not allow the use of the anchor brackets for sterling cables. Sterling cable anchors will have to be attached to the frame or welded... view full answer...
The Blue Ox BX7365 "Alpha" tow bar has been discontinued and was replaced by the # BX7380 "Alpha 2" which includes an improved non-binding system, and now includes safety cables. Otherwise their specifications are the same.
Since the BX7365 that you received is used, you should keep in mind that the warranty period was only 3 years and all tow bars only have a 7 - 10 year life span. Depending on its age, you may want to consider replacing it with the new Alpha 2. I believe if you call... view full answer...
For your 2011 Nissan Frontier the Draw-Tite # 75282 and the Curt # 13241 are both considered a compatible fit.
All the hitches that you have listed are Class III hitches are are of a high quality and have the same ratings for gross towing weight and tongue weight. All have identical installation procedures, and there is no drilling required for installation on any of these hitches.
When installed all of the hitch receivers will be approximately flush with the rear bumper of your truck.... view full answer...
Yes, the Curt # C48JR and Blue Ox # BLU33FR base plate kits that fit your 2022 Ford F-150 are essentially the same thing, just branded differently. They are both compatible with the same tow bars and have the same functions.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components I recommend the following:
Blue Ox Alpha 2 -... view full answer...
In my professional opinion, for your situation with traveling more on uneven terrain with your 1999 Toyota 4Runner, I would go with the Roadmaster BlackHawk 2 All Terrain Item # RM-422. I think the steel construction will withstand more pressure. That being said it is steel and is prone to corrosion over time. Also it is going to be heavier being steel. I don't know the exact weight but with my hands on experience using, testing, and installing it, I would guestimate it being somewhere... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit (XL) # 3141-1 is the correct kit if your 2010 Chevrolet HHR is not an SS model. It is compatible with Roadmaster tow bars using the Quick Disconnect Crossbar Assembly # 910021-00.
The Roadmaster EZ Base Plate Kit # 523159-1 is the correct kit if your 2010 Chevrolet HHR is the SS model.
We do have the wiring you would need to operate your HHR's tail lights when flat towing.
- Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-1676-7
Some... view full answer...
A lot of it really just depends on what you are looking for in a camera. Some people just want one while they are backing up while others would like to use it for observation. Hardwired vs Wireless is another variable as well.
One of the most popular backup cameras that we have comes from Rear View Safety with part # RVS-770613-213. This is a hardwired option that comes with a 66 foot cable for the trailer so it will have no problem running the length of your trailer. It also comes with... view full answer...
The primary difference between the two designs is the way they attach to the tow bar. The EZ5 does not use the quick-connect crossbar which provides a cleaner look, but prevents you from using some accessories that mount to the crossbar such as a Rock Guard like the Roadmaster # RM-4000. If you are at all interested in using a rock guard or protective screening, I recommend the Roadmaster EZ4 # 523175-4 on your Chevy Traverse.
Otherwise the EZ5 part # RM-523175-5 would be a great choice.
In... view full answer...
Easiest way to tell which gooseneck hitch you have is by looking at the safety cable loops. If they are about as wide as the gooseneck ball hole and are centered with the ball hole it's an EZr, if the safety chain loops are a smaller and offset then it's a double lock.
Take a look at the pictures of the EZR part # C611-624 and the # C607-604 and compare your safety chain setup to both of these. Let me know which yours matches and we can go from there.
The part # C16210 is for the Double... view full answer...
To answer the essence of your question before getting into some specifics, the difference between the cross bar and direct connect style of base plate can be broken down like this: the Roadmaster Direct Connect Base Plate # RM-523173-5 is going to provide for an easier connection to your tow bar than the Roadmaster Crossbar Style Base Plates # 523173-4 .
A lot of people stick with Crossbar style base plates because they have an old tow bar they want to continue using from a previously... view full answer...
Go To Results